Silver Flake

 

HighPoint can install & maintain many different types of electrolytic silver recovery systems or service any customer owned equipment that produces silver flake.

 

We also will purchase any amount of Silver Flake directly.

Systems                                                 

HighPoint can service any customer owned machine or we can install one of our own systems to meet your needs. 

 

Silver Flake will be paid out based on a factor and the daily troy ounce value of Silver Market.

 

HighPoint has a variety of options on installing electrolytic systems depending on budgets and needs.

 

Note:

· New/Used machines are limited to stock on hand.

· Service is limited to the Minneapolis/St. Paul and surrounding areas.

· Backup Canister is required and is an extra cost.

 

 

 

Service/Payment

How does it work?

There are many different types of electrolytic silver recovery systems available and in use today.  They all have one thing in common and that is that they recover the silver from the fixer solution.

 

This silver is known as silver flake and can be up to 99% pure silver.

 

In order to qualify for electrolytic silver recovery, it is recommended that you produce at least 2 gallons of waste fixer a day.

 

 

 

This method of silver recovery is used in larger applications and is where the silver is recovered from the silver bearing fixer solution by an electroplating process. A controlled electrical current is passed between the anode and cathode suspended in the fixer solution.  Silver is then attracted to the cathode (like a magnet to steel) and builds up to produce a silver flake material.

 

The cathode is removed periodically and the silver is harvested.  Silver is then sold at a factor based on the current market values of a troy ounce of silver.

 

Depending on the machine and when properly maintained, 70-90 percent of the potential available silver can be recovered.  Combining electrolytic silver recovery with a steel wool backup canister will result in meeting local, state and federal regulations of less the 5 ppm (parts per million) discharge to the waste water treatment plants.                                                                                                           

Prayers go up and Blessings Come Down!

Office & Mailing Address:                    Warehouse Address:

10600 University Avenue NW                   14022 Lincoln Street NE

Unit 1A                                                    (IAE Building)

Coon Rapids, MN 55448                          Ham Lake, MN 55434

          

Phone:     763-757-4920                         

Fax:         763-757-1592

Email:  Info@highpointenvironmental.com